WOOD Filament

WOOD is a modified PLA based type of filament, that smells and feels like wood. The different wood-types enable us to manufacture this wide range of natural wood colours. The filament
is tough enough for supplies on reels up to 2,3kg and prints very easy, even with common 0,4mm nozzles as the wood particles don’t block the nozzle. We at Dutch Filaments believe that this
makes WOOD one (if not the) best performing wood filaments on the market.

  • Feels and smells like WOOD
  • Easy to print at low temperature
  • Very low warping
  • Biodegradable
  • Preferably printed with > 0,4mm nozzle

Size ø tolerance Roundness
1.75mm ø 0,05mm 95%
2.85mm ø 0,10mm 95%

WOOD is available from stock in three different colours.
For non stock colours a minimum of 40kg ± 10% is required.

Due to its low tendency to warp WOOD can also be printed without a heated bed. If you have a heated bed the recommended temperature is ± 35-60˚C. We advise a nozzle > 0,4mm.
WOOD can be used on all common desktop FDM or FFF technology 3D printers.

Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.