ABS+ Filament

ABS+ is a transparent ABS filament, so strong, durable and impact resistant. Due to the low percentage of butadiene in M-ABS this filament smells much less unpleasant than ABS, and,
moreover, also shows less warping. The M-ABS polymer is inherently less impact resistant than ABS, but slightly modified our M-ABS @df filament is still approx. 3 times more impact resistant
than any regular PLA in the market. The transparency of the polymer makes it also possible to manufacture deep opaque colours, if desired.

  • Transparent, translucent
  • Not the unpleasant smell of ABS
  • High impact ABS+
  • Good chemical resistance
  • Less warping than ABS

Size ø tolerance Roundness
1.75mm ø 0,05mm 95%
2.85mm ø 0,10mm 95%

ABS+ is available from stock in 10 colours.
For non stock colours a minimum of 40kg ± 10% is required.

Recommended temperature for heated bed is ± 90-100˚C.
ABS+ can be used on all common desktop FDM technology or FFF 3D printers.

Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.